The SATLOOK HD COLOR is SAT-TV instrument and spectrum-analyzer. The unit is made for exact alignment
and adjustment of satellite-antennas. It is intended for professional use when high accuracy and precise
information are needed. It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn.
The SAT-part also has very high resolution and accuracy. It presents measured data ±1½ dB (at 20° C).
The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarisation (“cross-polarisation”).
The SAT- part presents, under one of the sub menus, digital informationlike BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio).
The NIT function of the SAT-part can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table).
The NIT also contains info about the transponders TV and Radio-channels.The unit has a built in DVB S-receiver which can store up to 100 Free To Air channels in
a favourite channel-list. SATLOOK HD COLOR can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders).
The power of the instrument is supplied by a built in and rechargeable battery. The instrument is provided with a 5” color 16:9 LCD-monitor.
Menus/help-displays are shown on the LCDscreen (64x128) beside the monitor.
Technical specification:
-
Input frequency: 920-2150MHz.
-
Sat-TV min level in: About 35 dBuV (noise).
-
Sat-TV max level in: About 90 dBuV.
-
Sat-TV attenuation: 15 dB attenuator on/off.
-
Display of signallevel
-
(analog): dB on LCD/monitor. Pitch-tone.Sat-TV accuracy: ±1½ dB (at +20° C).
-
DVB-S S/2 Digital display of signallevel: S/N (signal/noise-ratio) BER (bit errorrate) Constellation (QPSK and 8PSK).
-
Satellite-indentification: Yes, by reading out the NIT in the Bitstream. Info about the TV and Radio channels.
-
TV standard: Multi TV/ (PAL, NTSC, SECAM).
-
KU- C-band: Yes, selectable.
-
Input impedance: 75 Ohm, BNC-con.
-
Picture-screen: 5” 16:9 TFT-LCD monitor
-
Menus: On LCD 64x128.
-
Memory: - Lots of spectrum pictures can be stored with name.
-
Stored spectrum can be mixed for easy identification of satellite.
-
-“Maxhold”-function.
-
Favouritechannels: Both analog and digital frequencies can be stored (with name).
-
100 DVB-S Free to Air channels can be stored in a favourite channel-list.
-
PC-connection: RS232-output and PC-software.
-
Sat-TV power out: Yes, 13-18V.
-
Sat-TV control: 22 kHz, DiSEqC SatCr (UniCable).
-
DiSEqC: Yes, all 1.0 and 1.1. 1.2, Toneburst on/off.
-
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
-
Battery: Rechargable 12v, 3.5 amp/hour.
-
Weight: About 4 kg incl. battery.
-
Accessories: Nylon carrying-case.
-
Power-supply of 220v/13.5v, 1.7amp.